-
Ergonomic, small and light
-
Compatible
ISO Short coupling
Can be used with all conventional
straight and contra-angle handpieces,
including Short Editions -
Constantly high power
High performance, reliable durability
Broad spectrum of speeds from 100 up to 40,000 rpm
-
Improved view thanks to LED technology
LED light integrated in the motor
-
Particularly small and light
Short
Slim
Light -
Optimally
balanced25% lighter, 15% shorter
Ideal weight distribution
satisfies ergonomic demands -
LED
technologyImproved view with LED light
LED light integrated in the motor
Daylight-quality illumination of the treatment site
Perfect balance of
performance and ergonomics
It is particularly small and surprisingly light,
is comfortable to hold and in addition to the consistent high power, also scores extra points with its features such as LED technology, long service life and quiet operation.
Your advantages at a glance
- Particularly small
- Optimally balanced
- 25% lighter, 15% shorter
- LED technology
- Constantly high power
- ISO Short coupling
- Low maintenance and preserved value
- Quiet and low vibration
-
Varied spectrum of applications
Optimal
treatment resultsSimply select the transmission instrument, set the speed and work with the recommended bur speeds.
-
Particularly small
The comparison shows:
The EM-12 L is no larger
than a matchbox. -
Optimally balanced
Short, slim and light:
ideal weight distribution means the EM-12 L is
perfectly balanced in your hand. -
Lighter complete system
25% lighter, 15% shorter
Combine the EM-12 L with the contra-angle handpieces from the
Synea Vision Short Edition range for a considerably shorter and noticeably lighter complete system.This makes it possible to satisfy the highest ergonomic demands and effectively avoid fatigue, even when working for extended periods of time.
-
LED Light
Improved view
The LED technology integrated in
the motor lights the treatment site
with daylight-quality illumination.
EXPERT TIP
“An electric motor with high-speed contra-angle handpieces is the best choice for the preparation of CAD/CAM treatments:”
Add-on MF-100
Low maintenance and preserved value
The long-lasting brushless drive means reduced service and maintenance costs combined with increased service life.
Sensor-controlled drive technology makes it particularly quiet and largely free from vibration.
-
Installation options
Flexible installation and customised positioning
You can also install the Add-on
below or on the side of the table
used for your dental unit. -
Removable display
Removable display
The display can be removed from the Add-on
and positioned independently of the control module. -
Add-on
Add-on
The W&H elcectric motor EM-12 L can be optimally integrated into your personalised workflow.
- smart table top with
- sterilizable tray
- offers an additional surface
Download Area
FAQ
- How do I connect the EM-12 L electric motor to my unit as an Add-on?
- Does the Add-on version of the EM-12 L electric motor require maintenance?
- Does the Built-in version of the EM-12 L electric motor require maintenance?
- Does the electric motor need to be lubricated with oil?
- Can my EM-12 L electric motor be reprocessed in a thermo washer disinfector?
- What is a brushless electric motor and what benefits does it offer me as a user?
- Can I sterilize my EM-12 L electric motor in a sterilizer?
- How can I integrate the EM-12 L electric motor into my unit as a Built-in version?
- Which contra-angle handpiece series is recommended for the EM-12 L electric motor?
more
Service
- Service
- Service Station Locator
- Disposal Guidelines
- Troubleshooting
-
Ergonomic, small and light
-
Compatible
ISO Short coupling
Can be used with all conventional
straight and contra-angle handpieces,
including Short Editions -
Constantly high power
High performance, reliable durability
Broad spectrum of speeds from 100 bis 40,000 rpm
-
Improved view thanks to LED technology
LED light integrated in the motor
-
Particularly small and light
Short
Slim
Light -
Optimally
balanced25% lighter, 15% shorter
Ideal weight distribution
satisfies ergonomic demands -
LED
technologyImproved view with LED light
LED light integrated in the motor
Daylight-quality illumination of the treatment site
Perfect balance of
performance and ergonomics
It is particularly small and surprisingly light,
is comfortable to hold and in addition to the consistent high power, also scores extra points with its features such as LED technology, long service life and quiet operation.
Your advantages at a glance
- Particularly small
- Optimally balanced
- 25% lighter, 15% shorter
- LED technology
- Constantly high power
- ISO Short coupling
- Low maintenance and preserved value
- Quiet and low vibration
Built-in Solution
Selected unit manufacturers offer the W&H EM-12 L electric motor as a fully integrated drive solution within the scope of a complete system. It can be controlled simply and conveniently via your dental unit’s control panel. Ask W&H or your unit manufacturer about the EM-12 L as a Built-in Solution.
-
Varied spectrum of applications
Optimal
treatment resultsSimply select the transmission instrument, set the speed and work with the recommended bur speeds.
-
Particularly small
The comparison shows:
The EM-12 L is no larger
than a matchbox. -
Optimally balanced
Short, slim and light:
ideal weight distribution means the EM-12 L is
perfectly balanced in your hand. -
Lighter complete system
25% lighter, 15% shorter
Combine the EM-12 L with the contra-angle handpieces from the
Synea Vision Short Edition range for a considerably shorter and noticeably lighter complete system.This makes it possible to satisfy the highest ergonomic demands and effectively avoid fatigue, even when working for extended periods of time.
-
LED Light
Improved view
The LED technology integrated in
the motor lights the treatment site
with daylight-quality illumination.
EXPERT TIP
“An electric motor with high-speed contra-angle handpieces is the best choice for the preparation of CAD/CAM treatments:”
Low maintenance and preserved value
The long-lasting brushless drive means reduced service and maintenance costs combined with increased service life.
Sensor-controlled drive technology makes it particularly quiet and largely free from vibration.
Restoration & Prosthetics
Electric motor EM-12 L Built-in kit analog
> MC-1.0 Motorcontroller analog
> VE-10 hose
> EM-12 L Electric motor
> 2 Connection sets (pneumatic and electric)
Electric motor EM-12 L
REF 90000245
analog Display Basic
Request price
Restoration & Prosthetics, Endodontics
Download Area
FAQ
- How do I connect the EM-12 L electric motor to my unit as an Add-on?
- Does the Add-on version of the EM-12 L electric motor require maintenance?
- Does the Built-in version of the EM-12 L electric motor require maintenance?
- Does the electric motor need to be lubricated with oil?
- Can my EM-12 L electric motor be reprocessed in a thermo washer disinfector?
- What is a brushless electric motor and what benefits does it offer me as a user?
- Can I sterilize my EM-12 L electric motor in a sterilizer?
- How can I integrate the EM-12 L electric motor into my unit as a Built-in version?
- Which contra-angle handpiece series is recommended for the EM-12 L electric motor?
more
Service
- Service
- Service Station Locator
- Disposal Guidelines
Electric motor EM-12 L
Type: | EM-12 L |
Speed range*: | 100 – 40,000 rpm |
Maximum power: | 59 W |
Length (effective, without ISO connection): | 31.55 mm |
Weight: | 57 g |
Noise level: | 43 dB (A) |
Light: | LED |
Spray: | internal |
Cooling air: | 6 – 8 Nl/min |
Direction of rotation: | Forward/reverse operation |
Instrument coupling: | ISO 3964 (short) compatible |
Warranty: | 24 months |
*Speed range depends on motor/system version |
Add-on control MF-100 for EM-12 L
Type: | MF-100 |
Speed range: | 2,000 – 40,000 rpm |
Mains voltage: | 100 – 240 V, 47 – 63 Hz |
Dimensions(height xwidth x depth): | 92 x 156 x 211 mm |
Weight: | 1.06 kg |
Warranty: | 24 months |